Professional Modesta ceramic coating is about far more than applying a protective product to freshly washed paint. The finish beneath the coating, the preparation, the primer and the curing process all help determine the result. At AusPro Detailing in Greystanes, Western Sydney, those details are central to our installation process.

Our recent Modesta BC-04 installation on a Hyundai i30 N illustrates that process. The same principles apply to new and used cars of all makes, including daily drivers, family SUVs, four-wheel drives and performance vehicles. We assess the condition and required work on each vehicle individually.

This Hyundai i30 N received professional paint correction and Modesta BC-04 Nano-Titanium Glass Coating at AusPro Detailing in Greystanes, Western Sydney. BC-04 is one of our premium Modesta ceramic coating options offering durability of up to 10 years, depending on use, exposure and maintenance, alongside enhanced gloss, water repellency and easier maintenance.

Finished grey Hyundai i30 N photographed from the front in the AusPro Detailing studio
The finished Hyundai i30 N after the Modesta coating process and M1 Shot finishing stage.

Achieving that finish involves a substantial amount of work before the coating is applied. Preparation establishes the condition of the paint, the clarity of the finish and the surface onto which the protection system will bond.

Washing and decontamination

The initial washing and decontamination process included:

  1. Snow-foam pre-wash to begin loosening surface dirt before contact washing.
  2. Contact wash to thoroughly clean the vehicle before further decontamination.
  3. Iron fallout removal, applying a dedicated iron remover to the paintwork to target ferrous contamination.
  4. Tar removal, using a dedicated tar remover to address tar deposits on the paint.
  5. Clay bar treatment to remove remaining contamination bonded to the paint surface.
  6. Adhesive residue removal, carefully cleaning away adhesive remaining from transport protection and similar materials.
Snow-foam pre-wash. The original dripping sound is preserved, with very soft background music.

Each treatment addresses a different type of contamination. Iron fallout removers target ferrous particles, while suitable tar and adhesive removers address residues that require a different cleaning approach. A freshly washed car can look clean while still needing these additional preparation stages.

Close-up of paint defects on the Hyundai i30 N before correction
Paint defects documented before correction.
Rear spoiler defects before correction.

Controlled infrared pre-baking also formed part of this vehicle’s preparation before polishing. We used this stage to help assess and address persistent water spotting during preparation. Controlled heat cycling, cooling and reinspection can help reveal persistent spotting that requires further treatment. Heat does not remove every mineral deposit or repair etching by itself. The subsequent assessment, treatment and safe polishing remain essential to addressing the affected surface.

Infrared pre-baking during preparation, before polishing.

Paint correction under inspection lighting

The paint was then corrected and inspected under dedicated lighting. Machine polishing improves gloss and clarity while addressing minor paint defects, including marks that can result from improper polishing during dealership preparation or previous detailing, such as haze, swirls and holograms.

Polishing also plays an important role in completing the cleaning and preparation of the paintwork. It can address persistent staining, oxidation and shallow etching that chemical decontamination alone will not correct, where these can be safely improved. Chemical decontamination and mechanical correction therefore serve complementary purposes in preparing the finish.

This requires methodical work across individual panels, checking the finish as correction progresses. Panel shapes, edges and harder-to-reach areas all require attention, with the aim of improving clarity and reducing defects while preserving as much clear coat as practical.

Metallic grey Hyundai i30 N paint reflecting inspection lights after correction
Paint after correction and before primer application.

Hoist access and a controlled detailing studio

Our hoist plays an important role in that work. Raising the vehicle brings the lower doors, side skirts and bumpers to a more accessible working height. We can inspect these areas closer to eye level, position our lighting effectively and work with a clearer view of the surface. It also improves access when applying and inspecting the coating on lower sections.

Good lighting helps reveal defects and polishing marks that can be difficult to see from an awkward angle. Better access gives us greater control over the work, allowing the lower bodywork to receive the same attention as the bonnet and upper panels.

Grey Hyundai i30 N raised on a blue scissor hoist inside the AusPro Detailing studio
The finished vehicle on the hoist. Raising the car improves access and visibility when working on lower panels.

The vehicle is worked on inside our controlled detailing studio, where temperature and humidity can be adjusted to suit the process. This also reduces exposure to windborne dust, rain and direct sunlight, helping keep freshly prepared panels clean during application and curing.

Brand-new microfibre cloths and brand-new drying towels are used throughout the detail, with fresh cloths introduced as the work progresses. This helps prevent cross-contamination and reduces the risk of transferring dirt or product residue from one stage to another. Keeping the paintwork clean remains a priority throughout preparation and application. Gloves are worn throughout the process.

Cleaning after polishing

After paint correction, we completed the following preparation steps before applying the primer:

  1. Post-polish wash using demineralised water. The vehicle was washed again to remove polishing dust and residue left by the correction process.
  2. Demineralised water wipe-down. The paintwork received a further wipe-down as part of the surface-cleaning process.
  3. Multiple rounds of 100% isopropyl alcohol (IPA) wipe-downs. We worked over the paintwork using fresh microfibre cloths across successive rounds to remove remaining polishing oils and unwanted residues before applying Modesta P-01A.

These cleaning stages are an important part of the installation. A glossy surface still needs to be properly prepared for adhesion. Removing contamination and incompatible residues helps establish a suitable surface for the primer and coating system.

Modesta P-01A primer, BC-04 coating and infrared curing

For this Hyundai, we machine-applied two coats of Modesta P-01A primer. P-01A can be layered and forms a resin foundation that enhances gloss, depth and clarity while supporting adhesion between the paint and the Modesta coating. The applied primer was allowed to cure for three hours before BC-04 application.

After two coats of Modesta P-01A primer.

BC-04 combines liquid-glass technology with nano-grade titanium to enhance paint reflections, gloss and protection. Under our installation practice, we use a complete 30 ml bottle for each car.

After BC-04 was applied, the vehicle underwent controlled short-wave infrared curing. This is a required part of Modesta’s professional installation process and helps the coating develop its intended performance. Surface temperature, lamp distance and exposure time must be managed according to the product’s application requirements.

Infrared curing after the ceramic coating application.

Wheels-off ceramic coating with Modesta BC-09

At the owner’s request, this Hyundai also received a wheels-off ceramic coating treatment. The wheels were carefully removed, thoroughly cleaned and prepared, providing access to the faces, behind the spokes and inside the barrels.

Hyundai i30 N raised on a hoist with its wheels removed
Removing the wheels provides access to their faces, behind the spokes and inside the barrels.

We applied multiple coats of Modesta BC-09 Hi-PHPS, a perhydropolysilazane coating designed for wheels and other demanding surfaces. Modesta states a coating heat resistance of up to 1,300°C. Its protective film helps resist staining and the adhesion of brake dust and road grime, making ongoing cleaning easier.

Removed Hyundai N wheel positioned beneath infrared curing lamps
Infrared curing of the wheel coating after Modesta BC-09 application.

The coated wheel faces and inner barrels were then infrared cured. Once these stages were complete, the wheels were refitted and the wheel nuts torqued to Hyundai’s manufacturer specifications.

Hyundai i30 N wheel arch and red brake caliper with removed wheels curing in the background
The wheels-off process, with coated wheels curing in the background.

Final presentation and long-term care

The finish was completed with Modesta M1 Shot. The studio photograph shows the vehicle after this finishing stage, while the outdoor photograph shows the completed paintwork in natural daylight after BC-04 application and infrared curing.

Finished grey Hyundai i30 N viewed from the rear quarter outdoors
The completed paintwork in natural daylight after Modesta BC-04 application and infrared curing.

Ceramic protection still requires sensible washing methods, compatible maintenance products and prompt removal of environmental contamination. We provide aftercare guidance appropriate to the installed coating.

What professional ceramic coating preparation involves

Our process allows multiple days for preparation, correction, application and curing. On more demanding projects, preparation alone can involve 30–40 hours of work or more, depending on the vehicle’s condition and correction requirements. The coating application represents only one stage of that commitment.

We do not offer an eight-hour turnaround for this paint correction and Modesta ceramic coating service. Thorough decontamination, careful paint correction, repeated surface cleaning, primer curing and infrared curing all require time. We schedule the work around the vehicle’s needs and the coating system’s application requirements.

The paint correction and Modesta BC-04 treatment on this Hyundai i30 N cost $2,295, with the wheels-off ceramic coating treatment charged separately. That investment covers skilled labour, careful inspection, thorough preparation, specialist equipment and the complete primer, coating and curing process.

Promotional prices and advertised “free” extras can make a ceramic coating package sound appealing. Assess the total package by the work delivered and the price paid. An included extra offers limited reassurance about the quality of the preparation, paint correction or coating installation.

Professional detailing has real operating costs: skilled labour, products, fresh towels, equipment, studio overheads and the time allocated to preparation and curing. When a quote is substantially lower, it is reasonable to ask how the scope differs, which preparation stages are included and whether any necessary work attracts an additional charge.

When comparing ceramic coating quotes, look closely at the preparation, correction and curing included. Ask for a clear explanation of the process behind the advertised price. Your pride and joy deserves careful workmanship and a service you can understand before committing to it.

Our service may not be the right fit for every owner or every budget. It is designed for clients who value thorough preparation, careful paint correction and a complete Modesta coating installation. Our pricing reflects the time, materials, equipment and workmanship involved. We explain that process clearly so you can decide whether this level of care matches your expectations for your vehicle.

Professional Modesta ceramic coating in Western Sydney

Based in Greystanes, Western Sydney, AusPro Detailing approaches ceramic coating as a complete preparation and protection process. As the Australian distributor for Modesta, we also support education and product access for professional authorised installers.

Explore our professional Modesta coating range and ceramic coating service, or contact AusPro Detailing for information about Modesta products and authorised installation.